H1010B Low Profile

Description

Marker consists of Iron casting to which is attached a replaceable 3M™ Snowplowable Marker Insert (Series 190) or Rayolite® Snowplowable Marker Insert (Series 2004) for reflecting light from a single or opposite directions. Reflector features:
- Polycarbonate prismatic optics,
- Abrasion resistant lens hardcoat,
- Impact resistant polycarbonate body.

All aspects of reflector installation are factory controlled to insure proper adhesion to casting.

Dimensional Details

Overall Dimensions are approximately:
- 10 inches long
- 4.9 inches wide
- 1.25 inches high
- Installed Height is approximately .250 inches above road surface

Material

Nodular Iron, conforming to Specification ASTM A536-84 Hardened to 52-54 Rockwell âœCâ.

Surface

Surfaces of casting shall be free of scale, dirt, rust, oil, grease or any other contaminant which may reduce its bond to the installation adhesive.

weight

Approximately 4.5 pounds each.

Identification

Casting is marked with manufacturerâ™s name and model number of marker.
3M Reflector Design and Fabrication
Construction Details:
- Polycarbonate body and lens
- Dimensions are approximately 3.95 inches long (100 mm) by 1.9 inches wide (48 mm) and 0.4 inches high (10 mm)
- Face Angle: 30 Degrees
- Area of Reflecting Surface: 1.84 sq in (11.9 sq cm)
- Pad Thickness: .04 inches (1.0 mm)

3M Optical Performance
(0.2) observation angle; (measured in cd/ftcd)